An ergonomic focus evaluation of work-related musculoskeletal disorders amongst operators in the UAE network control centres.

Work-related musculoskeletal disorders (WMSDs) have rapidly increased during the last decade, but only a few descriptive surveys have been conducted in the United Arab Emirates (UAE). This study investigated the prevalence of WMSDs and analysed their ergonomic risks amongst operators in the network control rooms across two government organisations, X and Y, in the UAE. Essential data were collected by the Nordic Musculoskeletal Questionnaire (NMQ) and the Maastricht Upper Extremity Questionnaire (MUEQ) from online surveys and direct observations based on the Rapid Office Strain Assessment (ROSA) and the Rapid Upper Limb Assessment (RULA) form and ergonomic measurements for the working environments, respectively. Fifty-three and eighteen operators participated from Organisations X and Y. This study found a high presence of WMSDs in both organisations over the past 12 months. In Organisation X, individual, work-related physical and psychosocial risk factors of high BMI, educational level, morning work shift, high job duration, lack of exercise habit, awkward body posture, high job demand, low job control, and low work social support were associated with WMSDs in different body areas (p < 0.05). In Organisation Y, older age, high BMI, high job duration, lack of exercise habits, unergonomic workstations, awkward body posture, low break time, high job demand, and stress level were associated with WMSDs in different body areas (p < 0.05). The control room operators' most affected body areas were the back, eyes, and neck. Several efficient ergonomic intervention ideas were explored to lessen the detrimental effects of WMSDs and preclude the development of WMSDs amongst the control centre operators.

Prevalence and risk factors of work-related musculoskeletal disorders among emerging manufacturing workers in Beijing, China.

Objective: The workers in emerging manufacturing are at decreased risk of traditional occupational diseases, while probably at increased risk of work-related musculoskeletal disorders (WMSDs). This study aimed to investigate the prevalence and risk factors of WMSDs among emerging manufacturing workers in Beijing. Methods: A total of 3,359 valid questionnaires were collected from 10 enterprises in the electronics, pharmaceutical, and motor manufacturing industries. The prevalence of WMSDs was assessed using the Nordic Musculoskeletal Questionnaire. The work posture load was evaluated through a questionnaire. Results: The results showed that the highest prevalence of WMSDs was observed in part of the neck (15.0%), followed by the lower back (12.5%), shoulders (11.2%), and upper back (7.1%). Female workers, workers aged older than 35 years, workers with a BMI of ≥28 kg/m2, longer working experience, never exercised had a higher prevalence of WMSDs. Logistic regression analysis showed that female workers, workers aged older than 35 years, with a middle school education and college degree, and workers who never exercised had a higher risk of WMSDs. In addition, workers who sat for long during work, worked hard with upper limbs or hands, worked in uncomfortable postures, and performed repetitive operations were positively related with the increased risk of WMSDs. Conclusion: These findings suggested that WMSDs were prevalent among emerging manufacturing workers in Beijing, China, while efforts should be made to reshape the risk factors associated with WMSDs, such as prolonged sitting, uncomfortable positions, and repetitive operations. Encouraging exercise and promoting ergonomic interventions probably be also benefit to induce the risk of WMSDs.

Work-Related Musculoskeletal Disorders Among Farmers in the Southeast Asia Region: A Systematic Review.

Background: Southeast Asia has many people who work in the agriculture sector. Not many stakeholders pay special attention to the health of farmers, even though they are exposed to various types of hazards. One of the most common health complaints among farmers is related to work-related musculoskeletal disorders (WMSDs). This study aims to assess the prevalence of WMSDs and factors associated with them among farmers in Southeast Asia. Methods: A literature search on PubMed, ScienceDirect, Scopus, and EBSCO was conducted. Articles were included if they studied ergonomic problems among farmers from 11 countries in the Southeast Asia region and were published during 2015-2022. The Critical Appraisal Skills Program was used to evaluate the quality of the articles. The search process and retrieval process reflected PRISMA's recommendation. Result: There were 14 studies found from 3 countries that had published articles in PubMed and ScienceDirect, including Thailand [8], Indonesia [4], and Malaysia [2]. The prevalence of WMSDs in Thailand, Indonesia, and Malaysia was 78,31%, 81,27%, and 88,39%, respectively. Common factors associated with WMSDs include age, sex, smoking habits, drinking alcohol habits, working period (years), type of work, awkward position, non-ergonomic equipment, repetitive movements, and lifting heavy loads. Conclusion: The prevalence of WMSDs among farmers in Southeast Asia is considerably high. Effective intervention is essential for reducing the prevalence and protecting workers' health and well-being.

Epidemiological study of work-related musculoskeletal disorders and related risk factors among automobile maintenance workers.

BACKGROUND: The automotive industry is labor-intensive, and workers are involved in highly repetitive tasks, long hours, and medium to low workloads, resulting in work-related musculoskeletal disorders (WMSDs), which have become a major health concern for workers in this industry. China is a major automotive country with tens of thousands of auto repair workers, but their conditions of WMSDs have been poorly reported. OBJECTIVE: This work aimed to analyze the current prevalence of WMSDs and their associated risk factors among automobile maintenance workers. METHODS: A total of 539 respondents from 50 automotive repair and maintenance companies in China were selected to investigate the prevalence of WMSDs via the modified Nordic Musculoskeletal Disorders Questionnaire. Chi-square test and logistic regression models were applied to analyze their associated risk factors. RESULTS: The total prevalence of WMSDs among 539 workers was 32.8%. The top three body parts for prevalence were the lower back (17.1%), neck (16.3%), and shoulders (14.5%). The highest prevalence of WMSDs was found in the neck (23.6%) and lower back (14.3%) for sheet metal workers and mechanics, respectively, whereas painters had the highest prevalence of WMSDs in the lower back and feet (both at 15.4%). Logistic regression analysis showed that females were at higher risk of WMSDs than males (OR 5.027, [95% CI] [1.278-19.772], p < 0.05). Workers subjected to uncomfortable positions were at increased risk of WMSDs (OR 1.79, [95% CI] [1.333-2.410], p < 0.01). CONCLUSION: The prevalence of WMSDs is high among automotive maintenance workers, with the highest prevalence in the lower back (17.1%). Uncomfortable working postures and frequent repetitive movements with lower limbs and ankles at work may be important risk factors.

[Meta analysis of the prevalence and influencing factors of WMSDs among dentists in China].

Objective: To explore the relevant factors of work-related musculoskeletal disorders (WMSDs) among dentists through Meta analysis, providing a basis for the prevention and control of WMSDs among dentists. Methods: In April 2022, cross-sectional research literatures on the prevalence correlation of WMSDs among Chinese dentists were searched in databases such as China National Knowledge Infrastructure, Wanfang, VIP, PubMed, Web of Science, and Em Base database. The search was conducted from the establishment of the database until April 2022, literatures were selected using keywords such as musculoskeletal disorders and dentists. To extract gender, age, length of service, disease classification and other related influencing factors as indicator, and prevalence was selected as the outcome indicator. After evaluating the quality of the literatures, RevMan 5.3 software was used to calculate the combined RD (95%CI) values of the included literatures. Results: A total of 15 articles were included, with a total sample size of 3646 people. Meta analysis results showed that the prevalence of WMSDs among dentists in China was 80%, and the top three parts of the incidence rates were 65% of the waist, 58% of the neck, and 50% of the back. Gender, age, length of service, region and disease classification all increased the risk of WMSDs, and the combined effect size were 75%, 78%, 71%, 77% and 82% respectively (P<0.05) . Conclusion: The occurrence of WMSDs among dentists in China is related to multiple factors such as gender, age, length of service and disease classification. The above risk factors should be taken into account in the workplace and preventive measures should be actively implemented to prolong the working life of dentists.

Efficacy of passive upper-limb exoskeletons in reducing musculoskeletal load associated with overhead tasks.

Overhead work can pose substantial musculoskeletal stress in many industrial settings. This study aimed to evaluate the efficacy of passive upper-limb exoskeletons in reducing muscular activity and subjective discomfort ratings. In a repeated-measures laboratory experiment, 20 healthy male participants performed 10-min drilling tasks with and without two passive upper-limb exoskeletons (VEX and Airframe). During the tasks, muscle activity in eight muscles (upper limb - upper trapezius, middle deltoid, biceps brachii, triceps brachii; low back - erector spinae; lower limb - rectus femoris, biceps femoris, tibialis anterior) was collected using electromyography as a physical exertion measure. Subjective discomfort rating in six body parts was measured using the Borg's CR-10 scale. The results showed that muscle activity (especially in the upper-limb muscles) was significantly decreased by 29.3-58.1% with both exoskeletons compared to no exoskeleton condition. The subjective discomfort ratings showed limited differences between the conditions. These findings indicate that passive upper-limb exoskeletons may have potential as an effective intervention to reduce muscular loading and physical exertion during overhead work.

Manipulating device-to-body forces in passive exosuit: An experimental investigation on the effect of moment arm orientation using passive back-assist exosuit emulator.

Passive exosuits have been vastly researched in the past decade for lifting tasks to alleviate the mechanical loading on the spine and reduce the lower back muscle activities in lifting tasks. Despite promising advantages of exosuits, factors such as comfort directly influence the user's acceptability of such body-worn devices. Exosuits' routing/anchoring points, which transmit device-to-body forces, remain the leading cause of discomfort among users. In the present study, we sought to investigate the effect of the routing element, that is, the "moment arm," in altering the device-to-body forces and perceived discomfort. We first presented a simplified human-exosuit model to establish insight into the effect of the moment arm on the device-to-body forces acting at the shoulder (FS) and waist (FW). Further, an experimental investigation was conducted on 10 participants with six different exosuit moment arm configurations (C1, C2, C3, C4, C5, and C6) to investigate their effect on the device-to-body forces, perceived discomfort, and muscle activity using a passive back-assist exosuit emulator in a lifting/lowering task. Configuration C4 was found to be most beneficial in reducing device-to-body forces at the shoulder and waist by up to 44.6 and 22.2%, respectively, during lifting. Subjective scores also comprehended with the device-to-body forces, indicating that C4 produces significantly less discomfort for participants. The outcome of the study illustrates the importance of selecting an appropriate moment arm configuration for passive back support exosuits in alleviating the device-to-body forces and perceived discomfort.

Meta analysis of the prevalence and influencing factors of WMSDs among dentists in China / 中华劳动卫生职业病杂志

Objective: To explore the relevant factors of work-related musculoskeletal disorders (WMSDs) among dentists through Meta analysis, providing a basis for the prevention and control of WMSDs among dentists. Methods: In April 2022, cross-sectional research literatures on the prevalence correlation of WMSDs among Chinese dentists were searched in databases such as China National Knowledge Infrastructure, Wanfang, VIP, PubMed, Web of Science, and Em Base database. The search was conducted from the establishment of the database until April 2022, literatures were selected using keywords such as musculoskeletal disorders and dentists. To extract gender, age, length of service, disease classification and other related influencing factors as indicator, and prevalence was selected as the outcome indicator. After evaluating the quality of the literatures, RevMan 5.3 software was used to calculate the combined RD (95%CI) values of the included literatures. Results: A total of 15 articles were included, with a total sample size of 3646 people. Meta analysis results showed that the prevalence of WMSDs among dentists in China was 80%, and the top three parts of the incidence rates were 65% of the waist, 58% of the neck, and 50% of the back. Gender, age, length of service, region and disease classification all increased the risk of WMSDs, and the combined effect size were 75%, 78%, 71%, 77% and 82% respectively (P<0.05) . Conclusion: The occurrence of WMSDs among dentists in China is related to multiple factors such as gender, age, length of service and disease classification. The above risk factors should be taken into account in the workplace and preventive measures should be actively implemented to prolong the working life of dentists.

Mediating effect of emotion regulatory self-efficacy in the relationship between musculoskeletal disorders and turnover intention among operating room nurses / 中国职业医学

Objective To explore the mediating effect of emotion regulatory self-efficacy (ERSE) in the relationship between musculoskeletal disorders and turnover intention in operating room nurses. Methods A total of 372 operating room nurses from five hospitals in Shenyang City were selected as the research subjects using covenient sampling method. The Musculoskeletal Disorders Questionnaire, Turnover Intention Scale, and Emotional Self-Regulation Efficacy Scale were used to study the prevalence of work-related musculoskeletal disorders (WMSDs), turnover intention, and ERSE among the study subjects. The Bootstrap method was used for mediation effect analysis of ERSE. Results The prevalence of WMSDs among operating room nurses was 69.9%. The scores for turnover intention and ERSE among operating room nurses were (13.6±6.3) and (34.7±16.2), respectively. ERSE played a partial mediating role in the relationship between WMSDs and turnover intention among operating room nurses, with an effect value of 0.04 and the 95% confidence interval of 0.01 to 0.08, accounting for 8.1% of the total effect. Conclusion WMSDs and ERSE directly influence turnover intention among operating room nurses. WMSDs can indirectly increase turnover intention by reducing ERSE among operating room nurses.

Factors Associated with Work-related Musculoskeletal Disorders Risk among Bamboo Craftsman in Mojorejo Village, Ponorogo Indonesia

@#Introduction: Work-related Musculoskeletal disorders (WMSDs) becomes the one of most-occupational problem and highly related to the individual and work factors. Eighty percent (80%) workers in the woven bamboo industry in Mojorejo Village dominated by middle aged workers (>40 years) that most of their producing activities are manually handled, without using machine or modern technology. Incompatibility work station, long working hours and repeated movement aggravated the WMSDs risk. This study aims to describe the WMSDs risk and determine its factors based on individual characteristics. Methods: There are 58 workers as respondents in this cross-sectional study. Data were collected and analyzed using quantitative method. Posture Exposure (PE) were measured using the QEC instrument. While the WMSDs risk were measured using PLIBEL. Individual factors (PE, Age, Working Period) related to WMSDs were analyzed using Multinomial Logistic Regression (95% CI). The Chi-square test were also used to compare PE rates among WMSDs risk levels. Results: Most respondents (48.3%) with 51-70% PE rate have a high level of WMSDs risk. While 27 % respondents with PE rate >70% have a very high level. The neck is the region most exposed to the WMSDs (score 15.5/very high level risk). PE rate is the only factor that significantly related to WMSDs risk (sig. = 0.043; Rsquare = 0.529; r =0.703). While the age and working period has no significant correlation (Sig = 0.859 and 0.851 respectively). Conclusion: Based on the result, immediate improvement required to be implemented. It is suggested to redesigned work stations adjusted to the workers posture and position.

Work Related Musculoskeletal Disorders Among Bus Conductors of Udupi District, Karnataka.

Background: Government bus conductors are at high risk for work-related musculoskeletal disorders (MSDs) due to the work environment and work conditions. Thus, the present study was undertaken to assess the prevalence and associated factors of musculoskeletal problems among bus conductors. Materials and Methods: This cross-sectional study included 237 bus conductors of government bus depots. The data were collected by interview technique on a structured questionnaire. Self-reported musculoskeletal pain over the last 12 months was the case definition. Results: The present study revealed that 62.4% of bus conductors had musculoskeletal pain. The multivariate analysis suggested that tobacco smoking, overweight or obesity, and lack of enough breaks during work were significant risk factors for the occurrence of musculoskeletal pain in study participants. Conclusion: Thus, to conclude, the conductors are at risk of musculoskeletal problems, which can be attributed to occupational as well as non-occupational factors.

A Work-Related Musculoskeletal Disorders (WMSDs) Risk-Assessment System Using a Single-View Pose Estimation Model.

Musculoskeletal disorders are an unavoidable occupational health problem. In particular, workers who perform repetitive tasks onsite in the manufacturing industry suffer from musculoskeletal problems. In this paper, we propose a system that evaluates the posture of workers in the manufacturing industry with single-view 3D human pose-estimation that can estimate the posture in 3D using an RGB camera that can easily acquire the posture of a worker in a complex workplace. The proposed system builds a Duckyang-Auto Worker Health Safety Environment (DyWHSE), a manufacturing-industry-specific dataset, to estimate the wrist pose evaluated by the Rapid Limb Upper Assessment (RULA). Additionally, we evaluate the quality of the built DyWHSE dataset using the Human3.6M dataset, and the applicability of the proposed system is verified by comparing it with the evaluation results of the experts. The proposed system provides quantitative assessment guidance for working posture risk assessment, assisting the continuous posture assessment of workers.

Course Design and Learning Outcomes of a Practical Online Ergonomics Course for Surgical Residents.

OBJECTIVE: Course content was designed and the learning outcomes assessed for an online ergonomics course for surgical residents. This course could fulfill an optional Surgical Council on Resident Education (SCORE) curriculum on Surgical Ergonomics. DESIGN: The online course included five 5-minute modules within the residents' learning system, each ending with an ungraded knowledge question, and a final 5-question multiple-choice retention quiz that allowed infinite attempts. The course was designed by ergonomists and surgeons at a quaternary academic hospital system. Participants were given two weeks to complete the modules. An electronic survey with questions assessing ergonomics knowledge and understanding on a 5-point Likert scale (strongly disagree - strongly agree) was distributed both before and after the course. The post-course survey included three additional questions to elicit feedback regarding learning experience and course design. Descriptive statistics and nonparametric paired comparisons were used to evaluate learning outcomes. SETTING: General surgery residency program at an academic medical center in the U.S. PARTICIPANTS: Twenty-two general surgery post graduate year 1 residents (PGY1s) were recruited to participate and completed the pre-course survey. Eight out of the 22 participants (36%) completed the online course and quiz; seven (32%) completed the course, quiz, and the post-course survey. RESULTS: Participants had high pre-course awareness of the importance of surgical ergonomics, benefits of work-related musculoskeletal disorder (WMSD) prevention, as well as awkward intraoperative postures being an WMSD risk factor. Participants' confidence increased significantly from pre- to post-course in ability to assess risk (p = 0.021), but not in ability or willingness to mitigate risky surgical postures. Participants who completed the quiz answered a median of 4 (IQR: [4, 5]) questions correctly. All participants indicated that they would recommend this course to other residents. CONCLUSIONS: These short practical ergonomics online learning modules increased surgical residents' confidence in assessing surgical WMSD risks.

[Comparative analysis of work-related musculoskeletal disorders catalogues].

Work-related musculoskeletal disorders (WMSDs) refer to musculoskeletal disorders caused by work or work as the main cause, which are characterized by high prevalence and heavy burden of disease as a global problem. The classification and catalog of occupational diseases is of great significance for guiding the prevention and control of occupational diseases and safeguarding the rights and interests of workers. The types of WMSDs included in the list of occupational diseases vary greatly from country to country, and the regulations on specific pathogenic factors are also inconsistent. By sorting out and analyzing the lists and characteristics of WMSDs at home and abroad, and using the International Statistical Classification of Diseases and Related Health Problems (ICD-10) in occupational health to standardize of WMSDs in various countries, which would lay the foundation for future multi-country WMSDs occupational health registration and disease burden research, and provide a reference for China to revise the WMSDs list.

Musculoskeletal symptoms and associated factors among manual porcelain workers at different workstations: a cross-sectional study.

OBJECTIVES: To investigate the prevalence of work-related musculoskeletal disorders (WMSDs) symptoms and to identify the associated factors (individual, and work-related) among manual porcelain workers at different workstations. The risk level of each workstation was also assessed based on the working postures for the purpose of improving occupational health. METHODS: In total, 349 workers were recruited for this cross-sectional study. The Nordic Musculoskeletal Questionnaire (NMQ) was used to collect data on WMSDs symptoms in nine body regions. The relationship between individual/occupational factors and WMSDs symptoms was determined using multiple logistic regression analysis. The Rapid Entire Body Assessment (REBA) method was applied to classify the risk level of working postures at the five workstations (shaping, trimming, glazing, painting, and burning). RESULTS: The prevalence of musculoskeletal discomfort in at least one body region within the past 12 months was 69.1% among the participants: the neck (49.3%), lower back (43.8%), and shoulders (27.5%). Sex, work experience, daily working hours, perceived work fatigue, and workstation, were significantly associated with WMSDs symptoms in different body regions. The REBA indicated that 57.8% and 32.5% of the working postures were in the medium- and above high-risk levels, respectively. CONCLUSION: The findings of this study showed a high occurrence of WMSDs symptoms among manual porcelain workers and suggested that both individual and work-related characteristics should be considered to improve occupational health. Furthermore, urgent ergonomic intervention is needed to avoid awkward working postures that cause WMSDs symptoms in porcelain workers, particularly at the shaping and burning workstations.

Risk factors and prevalence of work-related musculoskeletal disorders in metropolitan bus drivers: An assessment of whole body and hand-arm transmitted vibration.

BACKGROUND: Metropolitan bus drivers have higher prevalence of work-related musculoskeletal disorders (WMSDs) due to their nature of work and working environment. OBJECTIVE: To identify the prevalence of WMSDs and associated risk factors and to conduct real-time testing to evaluate Whole Body Vibration (WBV) and Hand-Arm Vibration (HAV) in buses based on the ISO standards to assess the vibrations levels at different speeds. METHODS: Participants in this study were 370 full-time male bus drivers from the north and south zones of 13 depots of Bengaluru Metropolitan Transport Corporation (BMTC), Bengaluru, south India. Information regarding WMSDs symptoms during the previous 7 days and 12 months were collected by Modified Nordic Musculoskeletal Questionnaire (MNMQ). WBV and HAV testing was performed and vibration levels were compared with ISO-2631-1 (1997) and ISO-5349-1-2001 standards. It was found that 68.7% of participants reported WMSDs. RESULTS: Several individuals and work-related factors were found to be statistically significant with WMSDs. From the Gini impurity measure, vibration and road types (Asphalt pavement and Rough road) were considered as vital risk factors associated with WMSDs. CONCLUSION: From the WBV and HAV evaluations, it was found that for buses on asphalt pavement at > 60 km/h, the vibration level was higher compared to a lower speed. The vibration level exceeded the Exposure Action Value (EAV) on rough roads at all speeds (20km/h, 40km/h and 60km/h) and in several situations considered based on assumptions the vibration level exceeded the Exposure Limiting Value (ELV).

Modeling and Validation of Fatigue and Recovery of Muscles for Manual Demolition Tasks.

Manual demolition tasks are heavy, physically demanding tasks that could cause muscle fatigue accumulation and lead to work-related musculoskeletal disorders (WMSDs). Fatigue and recovery models of muscles are essential in understanding the accumulation and the reduction in muscle fatigue for forceful exertion tasks. This study aims to explore the onset of muscle fatigue under different work/rest arrangements during manual demolition tasks and the offset of fatigue over time after the tasks were performed. An experiment, including a muscle fatigue test and a muscle fatigue recovery test, was performed. Seventeen male adults without experience in demolition hammer operation were recruited as human participants. Two demolition hammers (large and small) were adopted. The push force was either 20 or 40 N. The posture mimicked that of a demolition task on a wall. In the muscle fatigue test, the muscle strength (MS) before and after the demolition task, maximum endurance time (MET), and the Borg category-ratio-10 (CR-10) ratings of perceived exertion after the demolition task were measured. In the muscle fatigue recovery test, MS and CR-10 at times 1, 2, 3, 4, 5, and 6 min were recorded. Statistical analyses were performed to explore the influence of push force and the weight of the tool on MS, MET, and CR-10. Both muscle fatigue models and muscle fatigue recovery models were established and validated. The results showed that push force affected MET significantly (p < 0.05). The weight of the tool was significant (p < 0.05) only on the CR-10 rating after the first pull. During the muscle fatigue recovery test, the MS increase and the CR-10 decrease were both significant (p < 0.05) after one or more breaks. Models of MET and MS prediction were established to assess muscle fatigue recovery, respectively. The absolute (AD) and relative (RD) deviations of the MET model were 1.83 (±1.94) min and 34.80 (±31.48)%, respectively. The AD and RD of the MS model were 1.39 (±0.81) N and 1.9 (±1.2)%, respectively. These models are capable of predicting the progress and recovery of muscle fatigue, respectively, and may be adopted in work/rest arrangements for novice workers performing demolition tasks.

Quantification of physical stress experienced by obstetrics and gynecology sonographers: A comparative study of two ultrasound devices.

This study aims to quantify the stresses of sonographers using two different ultrasound devices, one of conventional and one of ergonomic design. A total of 20 obstetricians and gynecologists participated in this study, and two types of tasks (scanning and positioning) were evaluated while using the two different devices. To quantify workload, four dependent variables (muscle activity, estimated grip force, subjective comfort rating, and task time) were measured. The muscular activity required while using the conventional device was 14.4% MVC (Maximum voluntary contraction) for the scanning task, which was significantly higher than that of the ergonomic device. The subjective comfort rating for the conventional design was lower than that of the ergonomic design. For the positioning task, the ergonomic device (33.2% MVC) resulted in significantly higher muscle activity in the extensor digitorum (ED) and flexor digitorum superficialis (FDS) than the conventional design (22.2% MVC), whereas the deltoid muscle showed significantly lower activity than in users of conventional design (4.5% MVC). Ergonomically-designed ultrasound devices improve ease of moving and the probe's supporters, reduce physical load and increase ease of use for sonographers. Our results may be used as guidelines for usability testing of ultrasound devices.

Comparative analysis of work-related musculoskeletal disorders catalogues / 中华劳动卫生职业病杂志

Work-related musculoskeletal disorders (WMSDs) refer to musculoskeletal disorders caused by work or work as the main cause, which are characterized by high prevalence and heavy burden of disease as a global problem. The classification and catalog of occupational diseases is of great significance for guiding the prevention and control of occupational diseases and safeguarding the rights and interests of workers. The types of WMSDs included in the list of occupational diseases vary greatly from country to country, and the regulations on specific pathogenic factors are also inconsistent. By sorting out and analyzing the lists and characteristics of WMSDs at home and abroad, and using the International Statistical Classification of Diseases and Related Health Problems (ICD-10) in occupational health to standardize of WMSDs in various countries, which would lay the foundation for future multi-country WMSDs occupational health registration and disease burden research, and provide a reference for China to revise the WMSDs list.

A study on musculoskeletal complaints and working postures in pathology specialists in Iran.

BACKGROUND: Musculoskeletal disorders (MSDs) are one of the most common causes of occupational injuries and disabilities among health care workers. This study investigates the relationship between musculoskeletal complaints and pathologist postures in laboratories. METHOD: In this cross-sectional study, 40 pathologists were evaluated. MSDs in different body segments of the participants were evaluated by Nordic questionnaire. For postural analysis, 20 min film was recorded while using a microscope by subjects. Posture analysis was done by the Rapid Upper Limb Assessment (RULA) method and their repetitive movements were scored. The data was analyzed by SPSS Version 11.5. RESULTS: The mean age and duration of employment of subjects was 36.57 ± 7.54 years and 6.50 ± 6.30 years, respectively. Most MSDs were found in neck (65%), wrist (57.5%), upper back (50%) and lower back (47.5%). The mean RULA grand score was higher in participants with upper back and shoulder pain. A statistically significant relationship was found between the mean RULA grand, the upper back pain (P = 0.02) and the wrist pain (P = 0.003), as well as between the mean RULA B, the neck pain (P = 0.02) and the lower back pain (P = 0.05). The results showed a significant relationship between mean weekly working hours and tight (P < 0.001), wrist (p = 0.01) and ankle (P = 0.008). CONCLUSION: This study revealed high prevalence of MSDs among the pathologists. Therefore, performing ergonomic corrective actions is essential in order to improve their physical conditions at work.